sunnyrose520的部落格

Material :
red copper wire--purity--Cu:99.8%

Material : red copper wire--purity--Cu:99.8% Plain weave copper wire mesh Characteristics of plain weave copper wire mesh: 1) Square hole,warp wire and weft wire are of equal size. 2) Accurate in mesh size,high flow rate. 3) High efficient screeing,good stability,high opening rate. 4) Many weaving points,flat surface,,good air permeability,firm in structure. Plain weave copper wire mesh is widely used for screening various particles,powder, porcelain clay,glass,chinaware printing,filter liquid; gas screening,industrial filtration, petroleum,chemicals,printing. D1,D2 stand for wire diameter;L1,L2 stand for mesh;T standsfor mesh thickness. copper covered lacquered wire in south africa Production range: wire diameter: 0.04-1mm mesh counts: 3-200 mesh common roll width:1m, 1.2m, 1.5m, 1.8m, 2m common roll length:30m, 50m, 100m Characteristics: non-magnetic, wear resistance acid and alkali resistance, good ductility good conductivity, good heat transfer performance Application: copper wire for transformers Copper Meshis frequently utilized in applications requiring shielding of electromagnetic interference(EMI)and radio frequency interference(RFI).The reduction or exclusion of Electro-magnetic interference and radio frequencyinterferenceis dependent upon the signal amplitudeand frequency in relation to the manycombinationsof mesh count, wire diameterand weaving materials available. Packing: Copper Mesh use moisture-proof packing and anti-extrusion packing.Copper Mesh is woundaround flatand dry mandrel,inside with moisture-proof paper or other packagingmaterial and outsidewith woodencases or wooden pallets

Picture of Magnetic Wire Magnetic Wire 1.JPG Magnetic Wire 2.JPG Magnetic Wire 3.JPG Magnetic wire is used by hobbyists and engineers for coils, inductors, transformers, and solenoids, and it is not cheap to buy at $25 to $60 dollars a pound. This is the wire I gathered in one weekend for no more cost than my time. The ten pounds of salvaged magnetic wire from 16 AWG to 34 AWG would have cost me about $300.oo dollars to buy new. And that doesn’t include the other salvaged parts like heat sinks, transformers, and other components as well as sellable scrap. I have a homemade coil winder I use to make my own custom transformers, coils, and solenoids that I use in my projects like this auto loading coil for a coil gun, or my first coil gun where I made the step up transformer as well as the propulsion coil. flat copper wire manufacturers As a green project this one saves energy in the making of wire and other components as well as recycling, one of the biggest savings is to your pocket book. Picture of Locating the Magnetic Wire Magnetic Wire 5.JPG Magnetic Wire 4.JPG I get most of my magnetic wire from working TVs and Monitors, people are throwing these out because they are upgrading to the new stuff on the market. Or in the case of TV sets upgrading because the transmitters have gone digital and the old analog TVs can’t receive the signal. aluminium rectangular magnet wire The yoke ring coils as indicated in the second photo with the yellow arrows, the yoke ring coils consisting of 28 to 34 AWG wire are in the front and the back of the yoke. The lacquered yoke coils wrapping the yokes ferrite cores indicated by the red arrow in the second photo are too hard to salvage for reuse as magnetic wire, however they bring as much as $2.50 a pound cleaned copper. The picture tube coil indicated by the yellow arrow in the third photo, on the back of the picture tube can be wrapped in electrical tape, foil wrap, and shrink tube. The magnetic wire in this coil can be 24 to 34 AWG.

We can supply:
Enameled Copper Clad Aluminum wire (ECCA) :0.10mm-0.85mm